(3 customer reviews)





SKU: N/A Category:
Resin Warehouse Crystal Coat Resin is a 2 part (1 parts A and 1 part B) 1:1 mix epoxy resin, which when mixed, poured and cured will leave you with a crystal clear finish. This resin is resistant to most household chemicals and can withstand surface temperatures around 80°C.  The Crystal Coat formula has been designed for wave cells & flat surface coating of up to 2mm per layer for best results. It will mix’s perfectly with colour paste, pigment powders and Alcohol inks. Perfect for the Art/Crafts & top coating for a Crystal like finish.
Directions for use: Mix resin and hardener in 1:1 ratio (By Volume not by weight). Using a plastic container for mixing and mix thoroughly scraping sides of container to fully integrate products. Please use a clean, free of contamination mixing container. We suggest once mixed you pour into a second container and mix again so Part A & Part B is completely mixed. Once the product is poured into the mould, let the resin settle allowing air bubbles, foam to float to the surface. Any remaining bubbles or Foam can be removed with a heat gun or Blow torch.
The curing time for Top Coat can take up to 24-36 hours depending on ambient temperature.
  • Crystal Clear Finish
  • Food contact safe
  • Pot life 60-90 minutes depending on ambient room temp (20° approx)
  • Self Level Mixture: leaving consistent thickness up to 2mm (recommended).
  • Superior Air Release: Micro bubble release formula
  • UV Resistant Formula: Added UV Inhibitors resist yellowing when exposed to the sun and Ultra Violet light
  • Minimal odour
  • Easy To Use: 1:1 by volume mix ratio
  • Impact Resistant: Cures super strong, leaving a smooth impact resistant surface
  • Voc Free
  • Meets Australian Standard AS 2311-2017 and ASTM D3960-05
  • Zero Solvent; BPA Free; Eco Friendly
  • Data sheets available upon request

1 litre, 1.5 Litres, 2 Litres, 3 Litres, 4 Litres, 6 Litres, 8 Litres, 10 Litres, 12 Litres, 15 Litres, 16 Litres, 18 Litres, 20 Litres, 30 Litres

3 reviews for CRYSTAL COAT

  1. Susanne Mulholland (verified owner)

    This is a fast setting thick resin that is great for coating, doming and art where you want more control over colour placement.

  2. Amanda Stirling (verified owner)

    Beautifully clear resin and easy to work with.

  3. Kay McFarlane (verified owner)

    Great resins, great service.
    Best resin I have used.

Add a review

Your email address will not be published. Required fields are marked *

Shopping Cart