MARINE

Resin Warehouse Marine Resin is a 2 part (2 parts A and 1 part B) 2:1 ratio mix epoxy resin which when mixed with hardener sets to a strong hard, firm finished product. Formulated for boat and fibreglass repairs including surfboards, it has superior strength and advanced uv inhibitors, also a fast 48- 72 hour cure time depending on ambient temperature. Ideal for fibreglass and other composite reinforcement and can be applied over most brands of resins with surface preparation. Useful as a filling and fairing compound and can be used with most types of Fibreglass, Carbon Fibre, Kevlar, Urethane Foams and other sandwich core materials.

(not compatible with chopped strand mat fibreglass).

____________________________________________________________________________________________________________________________________________________________________________________

Directions for use: Mix resin and hardener in 2:1 ratio (By Volume not by weight). Using a plastic container for mixing and mix thoroughly scraping sides of container to fully integrate products. Please use a clean, free of contamination mixing container. We suggest once mixed you pour into a second container and mix again so Part A & Part B is completely mixed. Once the product is poured into the mould, let the resin settle allowing air bubbles, foam to float to the surface. Any remaining bubbles or Foam can be removed with a heat gun or Blow torch.

The curing time for All-in-one can take up to 2-3 days depending on ambient temperature.

• Crystal Clear Finish
• Pot life 2-3 hours depending on ambient room temp (20° approx)
• Self Level Mixture: leaving consistent thickness up to 25mm
• Superior Air Release: Micro bubble release formula
• UV Resistant Formula: Added UV Inhibitors resist yellowing when exposed to the sun and Ultra Violet light
• Minimal odour
• Easy To Use: 2 to 1 by volume mix ratio
• Impact Resistant: Cures super strong, leaving a smooth impact resistant surface
• Voc Free
• Meets Australian Standard AS 2311-2017 and ASTM D3960-05
• Zero Solvent; BPA Free; Eco Friendly
• Data sheets available upon request

 

 

*Please note resin should not be applied directly on foam. Adhere fiberglass layers first.